NOTE: As of December 11, 2015, New Jersey's Clean Energy Program's has temporarily ceased accepting applications for the Combined Heat & Power and Fuel Cell Program (CHP/FC). The CHP/FC program has experienced a surge in applications since the start of FY16 and has a pipeline that currently exceeds the CHP/FC Board-approved program budget. Staff is currently reviewing potential funding reallocations among programs to continue the program in the near term.

The New Jersey Clean Energy Program (NJCEP) offers incentives for several types of small combined heat and power (CHP) and fuel cell systems that have a generating capacity of 1 MW or less and are located behind the meter of an existing electric or natural gas customer that pays the Societal Benefits Charge (SBC). This includes customers of the states investor-owned electric and natural gas utilities, but does not include customers of municipal utilities. A variety of equipment and installation requirements exist for determining eligibility (see details above and on the program web site), but in addition to these limitations the program guidance specifically notes that the following types of systems are not eligible for incentives: renewable source-fueled systems; portable and emergency backup power systems; used, refurbished, temporary, pilot, or demonstration equipment; systems that use diesel fuel, other types of oil or coal for continuous operation. However, systems that use Class I renewable fuels (as defined under the New Jersey RPS) are eligible under the separate Renewable Energy Incentive Program (REIP).  The EDA also offers low-interest financing for the small CHP program through the Energy Efficiency Revolving Loan Fund.

Projects the meet the minimum program requirements are evaluated for funding based on a variety of criteria, such as system efficiency, environmental performance, and other metrics (i.e., the program is not a first-come, first-served rebate program). The incentive available to an individual project is determined by the project type and size. Maximum incentives in reference to a percentage (%) of project cost also vary by project type. The following table summarizes the basic incentive terms (see the program web site for further details):

As indicated above, projects that are pursued in conjunction with energy efficiency improvements made under New Jersey's Pay for Performance (P4P) Program are eligible for a bonus incentive. Systems owned by a third-party (i.e., not the utility customer) are eligible for incentives under this program, but the term of the lease or energy purchase agreement must be at least 15 years and meet several other requirements. Incentives are distributed to participants in steps, as follows: 20% upon equipment purchase, 60% upon inspection and verification of the installation, and 20% one year after inspection and verification that the project is achieving the proposed/minimum efficiency threshold. Please see the program web site for further information and application details.